QINGDAO G&Z TRADING CO., LTD.
Antistatic Coating

Antistatic Coating

Send Inquiry

Available in transparent form, the offered specially composed Antistatic Coating is applied on the inner wall of various storage tanks to protect tank interior against impact and rust. This coating is applied either by brush or by spraying it on required surface. This specific coating can  endure acid, alkali, saline water and dry heat of up to 140℃. This coating is truly effective in extending functional life of applied items. Long lasting quality, water proof composition, long lasting nature, simple application technique and cost effectiveness are some of the special features of this coating. We are reckoned as an eminent manufacturer, supplier and exporter of standard grade Antistatic Coating.

Features

  • Known for its exceptional resistance properties against impact and abrasion
  • Water repellant nature
  • Outstanding protection ability against slat, acid, alkali and contaminated water of oilfield
  • Good fastening properties and minimal shrinkage rate at the time of curing

Name of the product :Two Pack Amine Cured SLH09 Epoxy Glass Flake Primer/Topcoat

Resistance Guide

  • HEAT RESISTANCE :-  It can withstand maximum 140℃ dry heat                      
  • WEATHERABILITY :- Generally it is  stored away from air, light and moisture                
  • SOLVENTS :- Helps to prevent overflow of varsol and refined petroleum based items                                             
  • ACIDS :-   Perfect for resisting spillage of mild acids.                                   
  • ALKALIS :- Prevents spillage of strong alkalis                                         
  • SALTS :-   Acts as a perfect barrier against alkali and neutral salts.                                               
  • WATER :- Good resistance capacity both against fresh water and saline water                                       
  • ABRASION :- Outstanding resistance capacity                                          
  • USES :- Extensively applied on the inside wall of tanks to make wall static and corrosion proof.

TYPICAL PROPERTIES AND APPLICATION DATA


COLOR

Brown Red (Primer), Light white (Topcoat)

DENSITY

1.4g/cm3          1.4g/cm3

SOLIDS BY VOLUME

8%             58%

SOLIDS BY WEIGHT

76%            76%

SPREADING RATE

4.1 m2/kg          4.1 m2/kg   (100um DFT)

DRYING TIME(23℃)

Touch  4 Hr   Handle  24 Hr  Full cure 7Days

SURFACE RESISTANCE

105Ω<R<109&OMEGA;

OVERCOAT INTERVAL(23℃)

Min 8 Hr  Max 7 Days 

STORAGE

at least 12 months (dry, cool and under cover )

FLASH POINT

26℃

PACKAGING

Part A: 21kg  Part B: 3kg

MIXING RATIO (m/m)

Part A : Part B=7:1

CURE TIME(23℃)

10min

POT LIFE(23℃)

4 Hr